How To Use

• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there are no objects (e.g. a utensil or a cloth) covering them. Even a thin film of water may make the controls difficult to operate.

For cooktops with the teppanyaki function:

1. Touch the teppanyaki function.

2. Teppanyaki has three power levels: when you activate this function, select the power level you want.

• You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF key are disabled.

To lock the controls

1. Touch the lock 🔒 key. The timer indicator will show "Lo" (Lock).

To unlock the controls

1. Make sure the hob is turned on.

2. Touch and hold the lock 🔒 key for 5 seconds.

3. You can now start using your hob.

1. Touch the Start / Pause ⏯ key, all the heating zones will stop working and all the zone indicators will show "I I"

2. Touch the Start / Pause ⏯ key again, all the heating zones will revert to their original setting.

• The function is available when one or more heating zones are working.
• If you don't cancel the pause control within 30 minutes, the whole cooktop will automatically switch off.

Activating the keep warm function

1. Select the zone you wish to use (e.g. front left zone).

2. Touch the keep warm key, the zone indication will show " I "

• If you want to activate the keep warm function for one or more heating zones, you need to select one by one.

Cancelling the keep warm function

1. Touch the heating zone selection key.

2. Select a new heat setting by touching the "Slider" control, then the heating zone will revert to the level you select.

Or

Turn the cooktop off using the On/Off key.

Activating the boost function

1. Select the heating zone you wish to use (e.g. front left zone).

2. Touch the "Boost" Ⓑ key and the power level indication will show "P".

Cancelling the boost function

1. Select the heating zone with the boost function activated.

2. Touch the "Boost" Ⓑ key or "Slider" control to cancel the boost function, and select the level you want to set.

• The boost function will remain on for 5 minutes, after that the zone will set to level 14 automatically.

Unsure of what heat setting to cook your food on? Please click to view cooking recommendations

Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass)

• Switch the power to the cooktop off.
• Apply a cooktop cleaner while the glass is still warm (but not hot!)
• Rinse and wipe dry with a clean cloth or paper towel.
• Switch the power to the cooktop back on.

Boil overs, melts, and hot sugary spills on the glass

• Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for ceramic glass cooktops, but beware of hot cooking zone surfaces:
• Switch the power to the cooktop off at the wall.
• Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the cooktop.
• Clean the soiling or spill up with a dish cloth or paper towel.
• Follow steps 2 to 4 for ‘Everyday soiling’ on glass above.

Spillovers on the touch controls

• Switch the power to the cooktop off.
• Soak up the spill.
• Wipe the touch control area with a clean damp sponge or cloth.
• Wipe the area completely dry with a paper towel.
• Switch the power to the cooktop back on.