First Time Use & Tips
Water Level
Select water level according to amount of clothes loaded into the machine where 1 is low and 8 is high. A solid indicator light indicates the water level to the left (1, 3, 5, 7) and a flashing indicator light indicates the water levels to the right (2, 4, 6, 8).
Display
The display shows the settings, estimated time remaining, options, and status messages for the washing machine. The display will remain on through the cycle. If using the delay function, the LED will be flashing with the remaining time before the machine starts washing. During a washing cycle, the LED is will be solid and show the remaining time of the program.
NOTE: If there is any break in the power supply while the machine is operating, the current program selected will be stored in the memory and will resume when the power supply is reconnected.
Rinse
Press this button to select the desired number of rinses.
Water Temperature
Press this button to select the water temperature. When both the Hot and Cold indicators are lit, the water temperature is set to Warm.
Start / Pause
After selecting the desired wash settings, press this button to start the wash cycle. You can also use this button to pause the washing machine during operation.
Power
Press this button to turn the washing machine On or Off.
Drum Clean
Drum clean aids in keeping the machine clean by pushing out dirt and grime lodged in the drum. A flashing LED indicates the cleaning function will be performed during the program.
NOTE: The function is included in the Mixed, Whites, Sport and Intense programs.
Delay
After selecting a Program, press the Delay button to choose a delayed start time. Press Start/Pause to commence the delay operation. To switch the delay start off, simply press the button until the delay light is off. If the program has already started, press the Power button to reset the program.
Function
Press this button to select desired wash functions. i.e. Soak, Wash, Rinse or Spin or a combination of these.
Child Lock
Simultaneously press the RINSE TYPE and PROG. buttons to activate the child lock. Repeat this process to deactivate the child lock.
NOTE: The Child Lock function will lock all buttons except POWER.
Program
Press this button to select the desired wash program. A solid LED indicates the program on the left (Mixed, Whites, Sport, Rapid) is selected whereas a flashing LED indicates the program on the right (Daily, Delicate, Intense) is selected.
Fast+
Fast+ is engaged by Simultaneously pressing the PROG. and TEMP. buttons. Repeat this process to deactivate. Fast+ will reduce the washing cycle time by 20-40% by increasing the intensity of the agitator.
Symbols
The below buttons can be used to change variables on all wash programWater Level
Select water level according to amount of clothes loaded into the machine where 1 is low and 8 is high.
Rinse Type
The no. of rinses can be selected and the water-saver feature activated. When activated the water-saver feature will no drain the water or spin the clothing, the water can then be re-used for the next load of washing.
Function
Select a combination of Soak, Wash, Rinse or Spin.
Temp
Select Hot, Warm or Cold water.
Delay
Allows up to a 24H delay start to be set. Follow the below sequence to enable. To disable, push the DELAY button until the LED screen is blank.
On >> Select Program >> Set Delay >> Start
1. Press the “Start/Pause” button to pause the machine. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the loading door and add or take out laundry.
4. Close the loading door.
5. Make changes in auxiliary functions, temperature, and speed settings if necessary.
6. Press the “Start/Pause” button to start the machine.
- If a powder detergent is being used, its recommended to mix with water before pouring into the detergent reservoir.
- Please choose a detergent specific to either top loading or front loading washing machines and suitable for the water temperature you wish to use so washing performance is maximized.
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items should be placed on or in the machine.
Daily
Everyday program suitable for a variety of garments that are normally soiled.
Mixed
Suitable for mixed load of garments such as cottons and synthetics.
Sport
Suitable for more durable garments such as sports and outdoor wear.
Rapid
15-minute program ideal for light clothing such as shorts, t-shirts, socks and undergarments.
Whites
Suitable for white cotton and synthetic garments. For best results use this cycle with warm or hot water.
Delicate
Softer cycle suited to easy care garments such as wool, silk, satin, synthetics fibres or blended fabrics.
Intense
Longer wash program with strong water stream and agitator movement suitable for medium to heavily soiled garments.